Lux Fickert code HD FG is a 140 mm resin abrasive for polishing slabs on an automatic polishing machine. The old entry does not publish a grit list, so the required Lux position and finish must be confirmed rather than copied from the separate resin diamond Fickert page.
What is defined for this Lux Fickert
| Product name | Lux Fickert |
|---|---|
| Code | HD FG |
| Length | 140 mm |
| Application stated | Polishing slabs on an automatic polishing machine |
No stone type, grit grade or gloss target appears in the saved specification. Those are open selection fields, not missing values that should be guessed.
Place the Lux tool in the actual line
Provide the automatic polishing machine, holder, slab material and the abrasive sequence before the Lux position. Describe the surface entering this stage and the finish used for acceptance. If replacing an existing tool, send its label and photographs of both the tool and a representative finished slab.
Quotation and trial record
- Confirm HD FG and 140 mm holder compatibility
- Name the slab material and incoming surface
- State the required Lux grade or supplier reference
- Record water and line conditions used in the trial
- Inspect surface uniformity and tool condition at the agreed point
Original product images
