|
DIAMOND WIRE
SAW FOR GRANITE
QUARRY
Diamond wire
saw is composed of diamond beads which is
stringed together with high strong steel
wire.
Diamond beads are produced coating diamond
powder on the column steel rings by three
types of technics: electroplating, sintering
& vacuum brazing.
Diamond beads are reinforced with rubber or
plastic injection and also spring on the
steel wire.
The Diameter of Diamond
wire saw is from
7.5mm to 11.5mm
to fit all kind of application
conditions: quarrying, cutting and profiling
marble, granite, limestone, sandstone
...
·Diamond Wire Saw for
Granite Quarry
Diamond
wire-saws are widely used for granite
quarries . The main specialties of diamond
wire-saws are :
· To be able to used for great area granite
quarries cutting
· To get high percentage of forming
dimension stone
· High manufacture efficiency
· Safety, low- noise, no- dust and friendly
surroundings
· Low cutting cost.
Specification
(mm) |
Beads/m |
Coating |
Product NO. |
Wire speed m/s |
Cutting speed(㎡/h) |
Life(㎡/m) |
| 10.5 |
40 |
Rubber
Rubber+Spring |
HD-GQ-R-A |
25-30 |
8-12 |
16-22 |
| 11 |
HD-GQ-R-B |
22-25 |
4-8 |
8-15 |
| 11.5 |
HD-GQ-R-C |
18-22 |
2-4 |
7-9 |
| 10.5 |
Plastic
Plastic+Spring |
HD-GQ-P-A |
25-30 |
8-12 |
16-22 |
| 11 |
HD-GQ-P-B |
22-25 |
4-8 |
8-15 |
| 11.5 |
HD-GQ-P-C |
18-22 |
2-4 |
7-9 |
Other
specification are available upon
requirements
·
Diamond Wire Saw for
Granite Block Squaring
This kind
of products can be used to dissect and get the
standard block. They have following
specialties:
· To be able to used for great area granite
quarries cutting
· Easy manipulation
· Friendly surroundings,low- noise
Specification
(mm) |
Beads/m |
Coating |
Product NO. |
Wire
speed m/s |
Cutting speed(㎡/h) |
Llife(㎡/m) |
| 8.5 |
37 |
Rubber |
HD-GB-R-A |
25-30 |
10-15 |
14-21 |
| 11 |
HD-GB-R-B |
22-25 |
5-10 |
10-14 |
| 11.5 |
HD-GB-R-C |
18-22 |
3-8 |
8.5-11 |
| 8.5 |
Plastic
Plastic+Spring |
HD-GB-p-A |
25-30 |
10-15 |
14-21 |
| 11 |
HD-GB-P-B |
22-25 |
5-10 |
10-14 |
| 11.5 |
HD-GB-p-c |
18-22 |
3-8 |
8.5-11 |
Other
specification are available upon
requirements
·
Diamond Multi-Wire
Saw for Granite
Diamond
mulwire-saws are suitable for cutting the
different kinds of large granite slabs and
have the following specialties:
· To produce slabs in very short time
· To get the even and smooth slab
· To involve always low power consume and
lesser raw material waste
· To have low- noise and friendly
surroundings
· Easy manipulation and with low cost
|
Specification
(mm) |
Beads/m |
Coating |
Hardness |
Wire
speed m/s |
Cutting speed(㎡/h)
|
Life(㎡/m) |
|
7.2/8.5/9.0 |
37/39 |
Plasticized and/or
with spring |
Low
rigidity granite |
22-26 |
15-20 |
10-20 |
|
Mid-rigidity granite |
20-24 |
10-15 |
8-15 |
|
Hard
granite |
18-22 |
5-10 |
5-10 |
|
Abrasive granite |
22-26 |
15-20 |
9-15 |
Other
specification are available upon
requirements
·
Diamond Wire Saw for
Granite Profiling
Diamond
wire-saws are suitable for cutting the
different kinds of large granite slabs and
have the following specialties:
· To produce slabs in very short time
· To get the even and smooth slab
· To involve always low power consume and
lesser raw material waste
· To have low- noise and friendly
surroundings
· Easy manipulation and with low cost
Specification
(mm) |
Beads/m |
Coating |
Product NO.l |
Wire
speed (m/s) |
Cutting speed(㎡/h) |
Life(㎡/m) |
7.2
8.5
9.0 |
37 |
Rubber |
HD-GP-R-A |
25-30 |
10-15 |
14-20 |
| HD-GP-R-B |
22-25 |
510 |
8-12 |
| HD-GP-R-C |
18-22 |
4-8 |
6-10 |
7.2
8.5
9.0 |
Plastic |
HD-GP-P-A |
25-30 |
10-15 |
14-20 |
| HD-GP-P-B |
22-25 |
5-10 |
8-12 |
| HD-GP-P-C |
18-22 |
4-8 |
6-10 |
Other
specification are available upon
requirements
|
