|
Diamond
Saw Blade & Segment
for Granite Block Cutting
Diamond saw blade&segment for cutting block of granite slate standstone,kinds of hard stones with quartz,suitable for bridge cutting machines&single arm cutting machines.
|
Dia.
(mm) |
Segment Dimension
(L × W × H) |
Core Thickness |
Segment No. |
|
Length |
Width |
Height |
|
900 |
24 |
7.0/6.5/6.0 |
10/12/15/20 |
5.0mm |
64 |
|
1000 |
24 |
7.0/6.5/6.0 |
10/12/15/20 |
5.0mm |
70 |
|
1200 |
24 |
7.5/7.0/6.5 |
10/12/15/20 |
5.5mm |
80 |
|
1350 |
24 |
8.5/8.0/7.5 |
12/15/20 |
6.0mm |
88 |
|
1400 |
24 |
9.0/8.5/8.0 |
12/15/20 |
6.5mm |
96 |
|
1600 |
24 |
9.4/8.9/8.4 |
12/15/20 |
6.5mm |
104/108 |
|
1800 |
24 |
10.0/9.5/9.0 |
12/15/20 |
7.0mm |
120 |
|
2000 |
24 |
10.5/10.0/9.5 |
12/15/20 |
8.0mm |
128 |
|
2200 |
2 |
11.5/11.0/10.5 |
12/15/20 |
8.5mm |
132/136 |
|
2500 |
24/30 |
12.0/11.5/11.0 |
15/20/30 |
9.5mm |
140 |
|
2700 |
24/30 |
12.0/11.5/11. |
15/20/30 |
9.5mm |
140 |
|
3000 |
24/30 |
12.5/12/11.5 |
20/30 |
10.0mm |
160 |
|
3500 |
24/30 |
13.0/12.5/12.0 |
20/30 |
10.0mm |
180 |
● Other specifications are available according to customers' requriements.
Wet use only with sufficient
water, Fast & Easy cutting,
long life, perfect performance.
The above specification is only for Reference, other or special specification can be ordered by customers.
Noted:
Warning: Please use
high frequency Silver Welded machine to make the brazing if you only order
diamond segments, and not
to use Fire to braze the segment to the saw blank, otherwise the diamond will be
damaged then the cutting performance will be influenced(Reduced)!
When place order for block
cutting diamond saw blades or Segments please inform
the following:
Diameter (Inch or mm)
Inner Hole Size (Inch or
mm)
Installation hole (If,
need drawing)
Segment No. (how many
pcs segment per blade)
Segment Size (L x W x H,
if possible please inform Steel Core Thickness)
Use of saw blade (For
Granite, or marble, or limestone, or Sandstone. or other material)
Quantity NO. (How many
pcs, or how many sets segments)
Machine Power/RPM (If
possible)
Feed Speed (M/Minute)
Expected Cutting Depth
(how many mm per time, forward or backward)
Coolant System (Water or
Oil, how many liters/Minute, etc.)
Expected Shipping Date
Special Requirements
(If)
|
